Metrohm tiamo 1.0 Manual - Manual (Page 592)

568 Configuration
Print (PDF)...
Outputs the device table as a PDF file.
Column display
With Edit, Column display... the dialog window Column display opens. Here you can
define the columns that are to be shown in the Device table.
Columns available
Shows all the fields that can be shown as columns in the device table.
Columns displayed
Shows all the fields that will be shown as columns in the device table. The
default position is that the fields
Device name, Device type, Device serial num-
ber, Status, Set to work, Next GLP test, Remarks will be shown. The columns
Device name and Device type are always present and cannot be removed.
Adds the selected column to the table.
Removes the selected column from the table.
Alters the sequence of shown columns by moving the selected column up-
ward or downward.
Add new device
Devices that are connected to the PC via an RS232 interface must be added
manually to the device table with Edit, New... . This opens the dialog window Device
selection .