Metrohm tiamo 1.0 Manual - Manual (Page 101)

Manual control 77
Stop Pump 2.
Heating/Gas
The heating, gas flow pump and inert gas valve of the 774 Oven Sample Proces-
sor are switched on and off here.
Heating
Heats the oven to the required temperature for the defined heating duration.
Temperature
[ 50 ] ... 250 °C, Init
Temperature to which the oven is to be heated. With Init heating will be car-
ried out up to the initial temperature set on the device.
Heating period
[ 1 ] ... 999 min
Duration of the heating-up phase until the required temperature has been
achieved.
Start heating. The current temperature is shown in the status display.
Stop heating.
Gas flow pump
Switch the gas flow pump at the 774 Oven Sample Processor on and off.
Switch the gas flow pump on. The elapsed time since the start is shown in
the status display.