Metrohm tiamo 1.0 Manual - Manual (Page 562)

538 Configuration
Users with the status enabled can log in in the usual way. An exception is
the first log in after a change in status from disabled or removed to enabled .
In this case a Start password must be issued with which this user can then
log in.
disabled
Users with the status disabled can no longer log in. They are automatically
given this status as soon as the number of incorrect log in attempts defined
in the Security settings has been exceeded.
removed
Users with the status removed can no longer log in. If the status of a user is
changed from enabled or disabled to removed then the user is automatically
moved to the group Removed users . If a removed user is subsequently
again given the status enabled or disabled then a dialog window appears for
selecting the group to which the user is to be assigned.
Start password
With 6 *-characters the invisible Start password is shown, which must be en-
tered the first time that a new user logs in or that a user must enter after a
change in status from
disabled or removed to enabled . When adding a new
user or after a change in status to enabled the Administrator must issue a
new start password. When the user has logged in with the start password
and then entered a new password then the start password is deleted again.
Opens the dialog window Start password . This button is only active for users
with the status enabled . If a user has forgotten his/her password then the
Administrator can issue a new start password here.
User group
Selection of the defined user group
Current user group. The Administrator can alter the group to which the user
belongs. The user is automatically moved to the new group. A user can
also be moved to a new group with Drag&Drop.
Remarks
Possibility of entering additional user information (e.g. position, address).
Add user
There are two ways of adding a new user:
• Select user group and the context-sensitive menu item Add user .
• Select user group and press button .
In both cases this opens the dialog window Add user .
User
24 characters
Short name of new user that must be used to log in at program start. After
the name has been entered a Start password must be issued with which
the user is entered in the list of users.