Metrohm tiamo 1.0 Manual - Manual (Page 209)

Report templates 185
Centered.
Justified right.
Prefix
50 characters
Text placed in front of the field contents.
Suffix
50 characters
Text placed after the field contents.
Preview
Shows the formatted number of pages.
Fixed report
Fixed reports are used for producing predefined part-reports of the determination
in the report.
Insert
In order to insert a fixed report in a report template the corresponding sym-
bol must be selected on the Module bar and then placed on the report
template by creating a field with the left-hand mouse key.
Properties
X pos.
Shows the predefined x-position for the fixed report.
Y pos.
0.0000 ... (max. page width) mm
y-position within the permitted section.
Width
Shows the predefined width of the fixed report.
Height
0.0000 ... (max. page height) mm
Height of fixed report.
Fixed report
[ Calculations ], Curves, Messages, Measuring point list, Method parameters,
Raw data (end points), Results list, Signature list determinations, Signature list
methods, Statistical data (full), Statistical data (short), Titration and measure-
ment data, Used common variables, Used devices, Used sensors, Variables
Selection of a predefined fixed report.
Image
An image field is used for including any external graphics on the report template.
Insert
In order to insert an image into a report template the corresponding symbol
must be selected on the Module bar and placed on the report template by
creating a field with the left-hand mouse key.