Metrohm tiamo 1.0 Manual - Manual (Page 263)

Subwindow Determination overview 239
Version:
Shows the version of the method. For original methods the additional text
(original) appears after the version number. As soon as the method has
been modified the additional text (modified) appears after the version num-
ber. This information is saved with the determination data when the recalcu-
lated determination is saved.
Saved:
Shows the date and time at which the method version was saved.
Opens the Method editor in the separate dialog window Method editor . Here
it is possible to modify parameters from existing commands as well as to
insert and delete tracks and commands; however, the modified method
cannot be directly saved here. If the dialog window is closed with
[OK] then
the method will be checked. The modified method then appears on the reg-
ister card
Methods with the addition (modified) . This modified method is then
applied to the selected determinations with [Recalculate] and can be saved
at any time with [Save as] .
Saves the modified method under the same name or under a new name. If
the modified method is saved under the name of an existing method then
all the earlier method versions will be deleted and a new version will be
generated with the number
1 .
Statistics
Individual results for the statistical calculation can subsequently be switched on
and off here.
Note
The tab Statistics will only be shown when the last determination (and only this
one) is selected from a set of determinations which, because of the statistics de-
fined in the method, belong together.