Metrohm tiamo 1.0 Manual - Manual (Page 272)

248 Database
Result view
In the subwindow Result view of the dialog window Reprocessing the calculated re-
sults and the variables used for them in the CALC commands will be shown and
updated at each recalculation.
For each CALC command the following items are shown:
Title
Name of the CALC command.
Result
Result name, result value with defined number of decimal places, units.
Statistical evaluations
Results of the statistical evaluation (mean value, absolute and relative stan-
dard deviations, number of measured values used for the statistics and sta-
tistics set counter).
If several determinations are selected for reprocessing then the navigation buttons
can be used to switch between showing the results of the individual determina-
tions:
Jumps to first determination.
Jumps to previous determination.
Jumps to next determination.
Jumps to last determination.
Note
If a result value is monitored and if it lies inside the limits defined in the
CALC
command then the text will be shown in green, if it is outside the limits the value
will be shown in red.