Metrohm tiamo 1.0 Manual - Manual (Page 262)

238 Database
Value
Shows the variable value.
Opens the dialog window Modify variable for editing the value of an existing
variable:
Variable
Shows the name of the variable.
Value
-1.0E+99 ... 1.0E-99, 0, 1.0E-99 ... 1.0E+99 (for Type = Number )
100 characters (for Type = Text )
'Date' (for Type = Date/Time )
Value of the variable. For variables of the type Date/Time the date must be
entered in the Date input window.
Note
If a variable is modified then with [Recalculate] all the selected determinations
will be recalculated with the new value. If one variable is not modified then when
several determinations are recalculated the original value of the variable will be
used (i.e. variables with the same name but different values will not be overwrit-
ten until they are deliberately altered).
Method
The method used for the focused determination is shown here with its tracks and
commands. A precondition is that the method is identical for all the determina-
tions that have been selected. The method structure can be modified as required
for the recalculation, i.e. all the functions of the Method editor are available.
Method name:
Shows the method name.