Metrohm tiamo 1.0 Manual - Manual (Page 599)

Subwindow Devices 575
Stop determination
The running determination will be automatically terminated. The following
message must be confirmed with [OK] .
Titrino
The parameters for the 702, 716, 718, 719, 720, 721, 736, 751, 758, 784, 785,
794, 795, 798 and 799 Titrinos are set on the following tabs:
• General
General device information such as device name, device type, serial
number, etc.
• Int. dosing device D0
Properties of the internal dosing device.
• Ext. dosing device D1/D2
Properties of the connected external dosing device (685 Dosimat or
700 Dosino).
Note
These tabs for external dosing devices are only present for 736, 751, 758 and
799 Titrinos.
• RS232
Selection of the serial interface to which the Titrino is connected.
• GLP
Information about GLP test and GLP monitoring.
General
Device name
50 characters, [ device type number_# ]
Name of device (can be freely defined by user).
Device type
Shows the type of device.
Program version
Shows the program version of the device.
Opens the dialog window Load new program version . This button is only ac-
tive when the device has an old program version that is not supported by
tiamo which can be updated by tiamo itself.