Metrohm tiamo 1.0 Manual - Manual (Page 134)

110 Workplace
Live modifications
With the context-sensitive menu item Live modifications the dialog window Live
modifications opens, in which sample data can be altered live during a running de-
termination.
Sample position
[ 1 ] ... 999
Position of the sample on the rack. This number is used to move to the
sample position with the command
MOVE . This means that Target = Sample
position must be set.
ID1 ... ID8
50 characters, selection from text templates
Sample identifications ID1...ID8. In this field any text can be entered, a
check for type and limits only takes place at the start of the determination.
For sample identifications of the type
Date/Tim e the entry must be made in
the format YYYY-MM-DD hh:mm:ss . If Text templates have been defined for
the sample identifications then these can also be selected.
Sample size
[ 1.0 ], numerical with max. 10 numbers
Sample size (weight). In this field you can only enter numbers, decimal
point,
+ , –, E and e . The limits will only be checked at the start of the deter-
mination.
Sample size unit
16 characters, [ g ], mg, µg, mL, µL, pieces
Sample size unit (weight). Any text can be entered in this field.
Note
In principle it is not possible to enter a formula in the Sample position , ID1...ID8 ,
Sample size and Sample size unit fields.
If the option Comment on modification of sample data is switched on in the Securi-
ty settings window then before saving the window Modification comment sample
data opens.
Modification comment for sample data
If the option Comments on modification of sample data is switched on in the Security
settings then before the edited sample data is accepted the window Modification
comment sample data opens first, in which a reason for the modification must be
selected and comments about the modification must be entered.