Metrohm tiamo 1.0 Manual - Manual (Page 161)

Subwindow Method 137
3.6 Subwindow Method
3.6.1 General
Subwindow Method
The subwindow Method shows the method loaded in the window Run on the tab
Single determination or Determination series with its tracks and commands; the
presentation is identical to that in the Method editor. The subwindow can be
switched on in the program part
Workplace in the definition of the Layout and then
becomes visible. It can be enlarged and diminished as required; it can also be
maximized.
Presentation of the active tracks and commands
Active tracks (tracks with the status BUSY ) are shown with a light red background,
active commands (commands with the status BUSY ) are marked with a red frame.
If automatic conditioning is switched on then commands involved with condition-
ing will be indicated by an orange frame.
3.6.2 Zoom for method window
The standard way of showing the method in the method window is with all tracks
being shown completely. With the context-sensitive menu item
Zoom the following
zoom steps can be selected for showing the method:
200%
Enlarges the view to 200%.
150 %
Enlarges the view to 150%.
100 %
Sets the view to 100%.
75%
Diminishes the view to 75%.
50%
Diminishes the view to 50%.
25%
Diminishes the view to 25%.
Fit to width
Adapts the view to the window width.
Fit to height
Adapts the view to the window height.
[ Fit in window ]
Adapts the view to the window width and height.
3.6.3 Live modifications
With a double-click on a command in the method window or with the context-
sensitive menu item
Properties the properties window of the corresponding com-
mand opens in which all the parameters are shown, but only the predefined live
parameters can be altered. This parameter window additionally contains the but-
ton [Apply] with which the altered live parameters can be adopted even when the
parameter window is open. Live parameters can be altered both in the BUSY
status and in the READY status. If the option Comment on modification of method is
switched on in the Security settings then before the altered data is accepted the
window Modification comment method opens.