Metrohm tiamo 1.0 Manual - Manual (Page 47)

Formula editor 23
Result variables
Result variables are special command variables that are generated by CALC com-
mands . In the Variables field of the Formula editor all the Results that are available
for the current method are listed according to their result name.
Syntax
'RS.Result name.Variable identifier'
Examples: 'RS.RS01.VAL' (='RS.RS01'), 'RS.TestTime.UNI'
In order to avoid syntax errors the result variables can be selected directly
in the Formula editor under
Variables/Results .
Result variables
Unless otherwise indicated, all the variables listed here in alphabetic order are of
the type
Number .
Identifier Description Command
.VAL Result value, facultative, i.e. 'RS.RS01' = 'RS.RS01.VAL' CALC
.ASD Absolute standard deviation for the result CALC
.MNV Mean value of the result CALC
.NSR Statistics current counter for the result CALC
.NST Statistics set counter for the result CALC
.OVF Limit infringement for result; 1 = limit infringed, 0 = limit not infringed CALC
.RSD Relative standard deviation for result CALC
.STS Statistics status for result; 1 = statistics on, 0 = statistics off CALC
.UNI Result unit ( Text ) CALC
Determination variables
Determination variables are variables which are assigned generally and not to in-
dividual commands that are generated in the method sequence. In the
Variables
field of the Formula editor all the Determination variables available for the current
method are listed according to their sorted name.
Syntax
'DV.Variable identifier'
Examples: 'DV.DUR' , 'DV.STT'
In order to avoid syntax errors the determination variables can be selected
directly in the Formula editor under
Variables/Determination variables .
Determination variables
Identifier Description
.DUR Duration of the determination in s ( Number )
.STT Time at which the determination was started ( Time/Date )