Metrohm tiamo 1.0 Manual - Manual (Page 290)

266 Database
Autoscaling
[ on ], off
If this option is switched on then all axes in the curve window will be scaled
automatically.
Parameters for the graphical presentation of the curves on the y2 axis (right-hand
y axis).
Quantity
Command-dependent selection
Selection of the quantity to be shown on the y2 axis.
Label
50 characters, [ auto ]
Freely definable axis labeling for the y2 axis. With auto the label from the
field Quantity will be used.
Curve
Curve color
Color selection, [ pink ]
Selection of the color for the curve line.
Symbol
Symbol selection, [ off ]
Selection of the symbol for showing the measured values. With off the
measuring points will not be shown.
Symbol color
Color selection, [ pink ]
Selection of the color for the measuring point symbol.
Smoothing
on, [ off ]
Switches curve smoothing on/off.
Smoothing factor x axis
[ 0.01] ... 1000
Factor for smoothing on the x axis.
Smoothing factor y-axis
[ 0.01] ... 1000
Factor for smoothing on the y axis.
Also show original curve
on, [ off ]
If this option is switched on then the original curve will be shown in addition
to the smoothed curve (dotted line, same color).