Metrohm tiamo 1.0 Manual - Manual (Page 211)

Report templates 187
Selection of the type of line.
Rectangle
Any rectangle can be inserted in the report template.
Insert
In order to insert a rectangle in a report template the corresponding symbol
must be selected on the Module bar and then placed on the report tem-
plate by creating a field with the left-hand mouse key.
Properties
X pos.
0.0000 ... (max. page width) mm
x-position within the permitted section.
Y pos.
0.0000 ... (max. page width) mm
y-position within the permitted section.
Width
0.0000 ... (max. page width) mm
Width of the rectangle.
Height
0.0000 ... (max. page height) mm
Height of the rectangle.
Thickness
0.1 ... [ 0.5 ] ... 10.0 mm
Thickness of the line for the rectangle.
Selection of the line color.
Selection of the type of line for the rectangle.
Switches the fill color on and off.
Selection of the fill color.
Curve field
Curve fields are used for showing determination curves in the report.
Insert
In order to insert a curve field in a report template the corresponding sym-
bol must be selected on the Module bar and then placed on the report
template by creating a field with the left-hand mouse key.