Metrohm tiamo 1.0 Manual - Manual (Page 153)

Subwindow Run 129
Closes the input window. The current sample data will not be entered in the
sample table (this must first be triggered with
[Apply] ).
Import sample data
With the menu item Sample table, Import data... on the tab Determination series the
dialog window Select files to import opens, in which the file from which the sample
data is to be imported must be selected.
File name
File name
Entry or selection of the file from which data is to be imported.
File type
[ *.csv ]
Selection of the import format for the import of data from a file.
The sample data from the selected file is inserted at the end of the sample
table. For each line data for the number of data fields defined on the tab
Display is expected in the run listed there.
Note
Irrespective of the number of data fields defined on the tab Display , all sample
data in the format Method name;Sample positi-
on;ID1;ID2;ID3;ID4;ID5;ID6;ID7;ID8;Sample size;Sample size unit have to be de-
fined in the import file for each line.
Save sample table
With the menu item Sample table, Save as... on the tab Determination series the win-
dow Save sample table opens in which a name for the working sample table to be
saved can be entered or selected.
List of sample tables
The list of sample tables contains information about all the saved sample
tables.
Name
Name of sample table.
Saved
Date and time at which the sample table was saved.
Saved by
Short name of the user who saved the sample table.
Lines
Number of lines in the sample table.
Comment
Comments about the sample table that have been entered on the tab Com-
ment .