Metrohm tiamo 1.0 Manual - Manual (Page 115)

Sample tables 91
Set lines inexecutable
Sets the selected lines to "inexecutable", i.e. these lines will not be carried
out in the method run. Such lines are crossed through with a red line.
Set lines executable
Sets the selected lines to "executable", i.e. they will be carried out in the run.
The menu Sample table beneath the sample table contains the following
menu items:
Save
Saves the current sample table under the same name.
Save as...
Opens the window Save sample table for saving the current sample table
under a new name.
Print (PDF)
Opens the window Print sample table (PDF) in which the output format can
be defined. The sample table is then produced as a PDF file.
Properties...
Opens the window Properties - Sample table in which the properties for the
selected sample table can be set.
Import data...
Opens the window Select files to import for the import of external data.
Move lines by drag & drop
The lines selected in the sample table can be moved by drag&drop into the
Working sample table.
Copy lines by drag & drop
The lines selected in the sample table can be copied with the Ctrl key
pressed down by drag&drop into the Working sample table.
Edit sample data
With the menu item Edit, Edit line the dialog window Edit line opens.
Method
50 characters, method selection
Method from the current method group with which the determination is to
be carried out.
Opens the window Open method for the extended method selection, if sev-
eral method groups exist. If in this window a method from a different group
to the current method group is selected then from now on this group will be