Metrohm tiamo 1.0 Manual - Manual (Page 490)

466 Method
MOVE - properties
Command name
25 characters, [ Move # ]
Name of the command.
Device
Device name
Device name, [ not defined ]
Selecting a device from the device table. Only those devices being able to
execute the command are selectable. Additionally,
not defined can be se-
lected. In this case, the device name must be assigned by the user at the
start of the method.
Device type
Device types, [ 814 USB Sample Processor ]
Display or selection of the device type. If a device is selected under Device
name , this parameter is not editable any more. The device type belonging to
the selected device is displayed instead.
If the option
not defined is selected as Device name , all device types being
able to execute the command can be selected independently from the de-
vices in the device table.
Target
Tower
[ 1 ], 2
Selecting the tower of the Sample Processor for moving to the required po-
sition. Both Tower 1 and Tower 2 are always selectable even if the Sample
Processor has got only one tower.
Move
Selecting the target position on the rack:
[ Sample position ]
Position defined in the Run window as parameter Sample position .
Rack position
Position on the rack.
Special beaker
Special position on the rack defined in the rack properties (see Rack prop-
erties - Special beaker).