Metrohm tiamo 1.0 Manual - Manual (Page 680)

656 Configuration
Warning limits for slope
on, [ off ]
If this option is switched on then the values for the slope will be shown in
orange if the limits are infringed.
Lower limits
-2.147E+9 ... 2.147E+9
pH electrode: 97.5 %
ISE (+1): 57.2 mV ISE (-1): -61.2 mV
ISE (+2): 27.7 mV ISE (-2): -31.7 mV
ISE (+3): 17.7 mV ISE (-3): -21.7 mV
ISE (+4): 12.8 mV ISE (-4): -16.8 mV
Lower warning limits for the slope.
Upper limits
-2.147E+9 ... 2.147E+9
pH electrode: 102.5 %
ISE (+1): 61.2 mV ISE (-1): -57.2 mV
ISE (+2): 31.7 mV ISE (-2): -27.7 mV
ISE (+3): 21.7 mV ISE (-3): -17.7 mV
ISE (+4): 16.8 mV ISE (-4): -12.8 mV
Upper warning limits for the slope.
Intervention limits for the slope
on, [ off ]
If this option is switched on then the values for the slope will be shown in
red if the limits are infringed.
Lower limits
-2.147E+9 ... 2.147E+9
pH: 95.0 %
ISE (+1): 55.0 mV ISE (-1): -62.4 mV
ISE (+2): 26.7 mV ISE (-2): -32.7 mV
ISE (+3): 16.7 mV ISE (-3): -22.7 mV
ISE (+4): 11.8 mV ISE (-4): -17.8 mV
Lower intervention limits for the slope.
Upper limits
-2.147E+9 ... 2.147E+9
pH: 105.0 %
ISE (+1): 62.4 mV ISE (-1): -55.0 mV
ISE (+2): 32.7 mV ISE (-2): -26.7 mV
ISE (+3): 22.7 mV ISE (-3): -16.7 mV
ISE (+4): 17.8 mV ISE (-4): -11.8 mV
Upper intervention limits for the slope.
Warning limits for pH(0) and E(0)
on, [ off ]
If this option is switched on then the values for pH(0) or E(0) will be shown
in orange if the limits are infringed.