Metrohm tiamo 1.0 Manual - Manual (Page 180)

156 Database
4.2.2 Select database in database symbol
The number of databases that are open is shown in the top left corner of the da-
tabase symbol. If 2 or more databases are open then the two databases that are
to be shown in the main window beside each other or one below the other can be
selected by using the database symbol.
No database is open. No loaded database is shown in the
main window.
One database is open and is shown in the main window.
Two databases are open. Normally only one database is
shown in the main window, but two databases can also be
shown beside each other or one below the other.
A click with the left or right mouse key on the
database symbol opens a menu in which the
names of all open databases are shown. The
databases shown in the main window are
indicated by a tick. By clicking on the required
database this will be shown in the main win-
dow instead of the previously selected data-
base.
4.2.3 Show single database
The last database to have been opened is shown alone in the main window as
standard. However, if the display of 2 databases has been switched on then a
switch back to showing a single database can be made with the symbol
or the
menu item View, Unsplit .
4.2.4 Show databases beside each other
With the symbol or the menu item View, Tile horizontally two databases are
shown beside each other in the main window.
4.2.5 Show databases one below the other
With the symbol or the menu item View, Tile vertically two databases are shown
one below the other in the main window.