Metrohm tiamo 1.0 Manual - Manual (Page 524)

500 Method
Device
Device name
Device name, [ not defined ]
Selection of a RS232 device from device table. Additionally, not defined can
be selected. In this case, the device name must be assigned by the user at
the start of the method.
Device type
Device types, [ RS232 device ]
Display or selection of the device type. If a device is selected under Device
name , this parameter is not editable any more. The device type belonging to
the selected device is displayed instead.
If the option
not defined is selected as Device name , all device types being
able to execute the command can be selected independently from the de-
vices in the device table.
Transfer commands
The non-editable table lists all defined transfer commands which are sent in
the listed sequence.
Moves the selected command upward (changes the sequence).
Moves the selected command downward (changes the sequence).
Open the dialog window Transfer command for entering a new transfer
command.
Note
10 transfer commands can be entered at maximum.
Open the dialog window Transfer command to edit the selected transfer
command.
Deleting the selected transfer command.
Timeout
on, [ off ]
[ 0 ] ... 9999.9; [ min ], s
Optional entry of a maximum waiting time. In case not all transfer com-
mands are finished after this time period, the command is cancelled and
the next command is started.