Metrohm tiamo 1.0 Manual - Manual (Page 216)

192 Database
Curve
Curve color
Color selection, [ pink ]
Selection of the color for the curve line.
Symbol
Symbol selection, [ no symbol ]
Selection of the symbol for showing the measured values. With no symbol
the measuring points will not be shown.
Symbol color
Color selection, [ pink ]
Selection of the color for the measuring point symbol.
Smoothing
on, [ off ]
Switches smoothing on/off for the curve.
Smoothing factor x axis
[ 0.01] ... 1000
Factor for smoothing on the x axis.
Smoothing factor for y axis
[ 0.01] ... 1000
Factor for smoothing on the y axis.
Curve field - options
X pos.
0.0000 ... (max. page width) mm
x-position within the permitted section.
Y pos.
0.0000 ... (max. page width) mm
y-position within the permitted section.
Width
0.0000 ... (max. page width) mm
Width of curve field.
Height
0.0000 ... (max. page height) mm
Height of curve field.
Command type
[ DET ], MET, SET, KFT, KFC, MEAS, MEAS T/Flow
Shows the command type for which a curve is to be produced.