Metrohm tiamo 1.0 Manual - Manual (Page 642)

618 Configuration
Device type
Shows the type of device.
Program version
Shows the program version of the device.
Opens the dialog window Load new program version . This button is only ac-
tive when the device has an old program version that is not supported by
tiamo which can be updated by tiamo itself.
Device serial number
Shows the serial number of the device.
Set to work
Shows the date on which the device was automatically added to the device
table.
Working hours
Shows the number of operating hours (only for 778, 789, 814 and 815 de-
vices).
Remarks
1000 characters, [ empty ]
Remarks about the device.
This button is only shown with a balance or barcode reader. In order to de-
lete the device from the device list the device must be disconnected.
RS 232
COM Port
COM1, COM2, ..., [ first free COM port ]
Selects the serial interface on the PC to which the balance is connected.
Baud rate
300, 600, 1200, 2400, 4800, [ 9600 ], 19200
Transmission speed.
Data bit
7, [ 8 ]
Number of data bits.
Parity
[ none ], odd, even
Type of parity check.