Metrohm tiamo 1.0 Manual - Manual (Page 690)

666 Configuration
Beaker sensor
Defines the beaker sensors for the rack.
Device
Shows the devices to which the rack is attached.
Table view
The rack table cannot be edited directly. With a click on the column title the table
can be sorted according to the selected column in increasing or decreasing se-
quence. The table view can be adapted with the left-hand mouse key as follows:
• Drag the margin between the column titles:
Sets the column width
• Double-click on the margin between the column titles:
Sets the optimal column width
• Drag the column title:
Moves the column to the required place
If the contents of a field is larger than the column width then the whole contents
can be shown as a tooltip by keeping the mouse cursor on the field.
With sample racks that are placed on a Sample Processor and are recognized
automatically the corresponding device name will be shown in the Device column.
In addition the line number will be shown with a green background.
If a rack is reserved for a running determination or for manual operation then the
line will be shown in gray and the rack cannot be edited until the determination
has been concluded.
Functions
The menu Edit beneath the rack table contains the following menu items:
New...
Adds a new rack manually.
Delete
Deletes the selected rack.
Properties...
Edits the selected rack.
Print (PDF)...
Outputs the rack table as a PDF file.
Add new rack
A new rack can only be generated as a copy of an already existing rack under a
new rack name and with a new rack code. With
Edit, New... the dialog window New
rack opens.
Copy from
All existing racks, [ Rack selected in the table ]
Selection of the rack to be used as a template for the new rack.
Rack name
25 characters
Name for the new rack. The selected name must not already exist.