Metrohm tiamo 1.0 Manual - Manual (Page 576)

552 Configuration
Dialog language
Dialog language
Deutsch, [ English ]
Selection of the dialog language.
Note
For the altered setting to become effective tiamo must be restarted.
Emergency stop button
on, [ off ]
If this option is enabled then the emergency stop button will be shown in all
program parts.
This button can be moved to any position with the left-hand mouse key
pressed down and is shown right at the top on the screen both in the tiamo
program window and outside it on the Windows desktop. A mouse click on
this button immediately stops all running determinations on all active work-
places. The emergency stop is effective even if no user is logged in, e.g.
when the user has been logged out automatically (see Login/Password pro-
tection).
Note
The emergency stop stops all commands and tracks on all workplaces but no
device functions switched on by a command (e.g. pumps, valves, stirrers). To
stop these devices a separate track containing the commands to stop the desi-
red functions must be called in the Exit track with the condition
SV.STO = 1 .
Save
Save on closing
Here you can define the settings to be saved when tiamo is exited. If the option is
switched on then when tiamo is exited the current view with its settings will be
saved automatically. If the option is switched off then any alterations that may
have been made to the view will not be saved and at the next program start the
original, manually saved view will be loaded.
Configuration settings
on, [ off ]
Switches saving the configuration view on/off on exiting the program.
Workplace settings
on, [ off ]
Switches saving the workplace view on/off on exiting the program.