Metrohm tiamo 1.0 Manual - Manual (Page 470)

446 Method
• CAL LOOP Conc
Calibration loop for calibrating ion selective electrodes (ISE elec-
trodes).
• CAL MEAS Conc
Measuring command for calibrating ion selective electrodes (ISE elec-
trodes).
Calibrating with manual solution changing
The basic structure of a calibration method with manual solution exchange looks
as follows:
Definition of the number of buff-
ers/standards and type of solution ex-
change.
The request for changing the buffer/standard must be activated in the command
CAL LOOP pH or CAL LOOP Conc respectively. During the method run a request for
changing the buffer/standard is displayed after each measurement.