Metrohm tiamo 1.0 Manual - Manual (Page 271)

Subwindow Determination overview 247
Autoscaling
[ on ], off
If this option is switched on then all the axes in the curve window will be
scaled automatically. In this case the fields Start value and End value cannot
be edited.
Options for the graphical display of the curves.
Show grid
on, [ off ]
If this option is enabled then a grid will be shown against the background.
Grid type
Select line type
Selection of the type of grid line.
Grid color
Color selection, [ dark gray ]
Selection of the color for the grid lines.
Background
Background color
Color selection, [ white ]
Selection of the color for the curve background.
Show end points
on, [ off ]
If this option is enabled then the end points found will be shown on the
curve by the symbol ♦ and labeled with
EP# (potentiometric end point),
BP# (break point), FP# (Fixed end point), HP (HNP), MI (minimum value) or
MA (maximum value).
Automatic EPs
Color selection, [ black ]
Selection of the color for automatically set end points.
Manual EPs
Color selection, [ light red ]
Selection of the color for manually set end points.
Show evaluation lines
on, [ off ]
If this option is enabled then the evaluation lines (tangents, auxiliary lines)
will be shown.
Tangents
Color selection, [ green ]
Selection of the color for the tangents and auxiliary lines.
Auxiliary lines
Color selection, [ blue ]
Selection of the color for the auxiliary lines.