Metrohm tiamo 1.0 Manual - Manual (Page 82)

58 General program functions
2.6.3 Functions
In the subwindow for functions/parameters both the functions for manual control
of the selected device as well as their associated parameters can be selected. In
addition the measured values for running actions and messages are shown here.
Depending on the device the following functions are possible:
• Dosing
• Stirring
• Remote functions
• Sample changer functions
2.6.4 Graphic display
In the subwindow for graphic display the manually triggered functions that are
running are shown graphically.
2.6.5 Dosing
If in the Select device subwindow the group Dosing devices or a single Dosing de-
vice is selected then in the subwindow for Functions/Parameters the functions and
parameters that are possible with these dosing devices will appear.
Dosing functions
Dosing functions for exchange and dosing units are shown on the following regis-
ter cards:
• General
• Prepare
• Fill
• Empty
• Add fixed volume
• Dosing
Devices
The dosing functions can be carried out with dosing devices that are built into or
connected to the following instruments :
Titrino: 702, 716, 718, 719, 720, 721, 736, 751, 758, 785, 784, 785, 794, 795, 798,
799
Titrando: 808, 809, 835, 836, 841
Dosing Interface: 846
Sample changer: 814, 815