Metrohm tiamo 1.0 Manual - Manual (Page 152)

128 Workplace
ID1 ... ID8
50 characters, selection from text templates
Sample identifications ID1...ID8. In this field any text can be entered, a
check of the type and limits is only made at the start of the determination.
For sample identifications of the
Date/Time type the input must be made in
the format YYYY-MM-DD hh:mm:ss . If Text templates have been defined for
sample identification then they can be selected.
Sample size
[ 1.0 ], numerical with max. 10 numbers
Sample size (weight). In this field only numbers, decimal point, + , –, E and e
can be entered. A check of the limits is only made at the start of the deter-
mination.
Sample size unit
16 characters, [ g ], mg, µg, mL, µL, pieces
Sample size unit (weight). Any text can be entered in this field.
Note
If data of the current sample data line for the running determination is being mo-
dified this is regarded as being a live modification. If the option
Comment on mo-
dification of sample data is switched on in the Security settings then before saving
the window Modification comment sample data opens.
Navigation
Shows the currently selected line in the sample table with the following
functions:
Jumps to first line in the sample table.
Jumps to previous line in the sample table.
Possibility of entering the required line number, which will be moved to di-
rectly when [Enter] is pressed.
Jumps to next line in the sample table. If the end of the table has been
reached then a new line will be generated automatically and also jumped
to. This increases the line number by +1 .
Jumps to last line in the sample table.
Jumps to a new empty line. This increases the line number by +1 .
Functions
Applies the entered sample data in the corresponding line in the sample
table. If the end of the table has been reached then a new line will be gen-
erated automatically. The same function can also be triggered with the [En-
ter] key. However, with [Enter] the next line will also be jumped to automati-
cally.