Metrohm tiamo 1.0 Manual - Manual (Page 522)

498 Method
Open the dialog window Wait for event/status for entering a new event
message being waited for.
Note
10 event messages can be entered at maximum.
Open the dialog window Wait for event/status to edit the selected event
message.
Deleting the selected event message.
Timeout
[ on ], off
[ 0 ] ... 9999.9; [ min ], s
Optional entry of a maximum waiting time. In case none of the conditions
defined above are fulfilled after this time period, the command is cancelled
and the proximate command is started.
Message
This message is displayed in the live window while waiting for the condition
defined above. The Text editor to enter or change the message is opened
with or by double-clicking into the message field.
SEND - event/state
Command
Command
Name of the command whose event message is waited for.
Event message
Event message, [ 'empty' ]
Selecting the event message/status to be waited for. The following event
messages and status can be selected:
Event/Status Type Meaning Commands
Start Event Command has been started. All
End Event Command has been finished. All
Dosing Event The dosing of the titration has been started. DET , MET
Measure Event The measurement of the titration has been started. DET , MET
Busy Status System is in condition BUSY , HOLD or ERROR . All
Finished Status Command has been finished at least once. All