INFICON IC6 Thin Film Deposition Controller - Manual (Page 59)

3 - 5
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
3.3 Displays
The IC6 has many display screens for monitoring and programming processes.
The six main types of displays are: Operate, Sensor, Source, Material, Process,
and General.
To move from one display to another, use the cursor and MENU keys. Figure 3-3
provides an overview of the Main Menu display hierarchy. Figure 3-4 provides an
overview of the Operate display hierarchy.
To maximize the life of the display, it can be set to turn off after a period of 1 to 99
minutes without a key press. See
section 7.9, AUDIO / VISUAL Page Set Up, on
page 7-10 . Pressing a key before the dimmer time elapses resets the dimmer
interval to start over. The default setting of 0 disables the dimmer function. When
the display is dimmed, the START, RESET and STOP keys remain active. To
restore the display to full brightness without stopping or starting the instrument, do
not press the STOP or START key.
3.3.1 Main Menu Display
From the Main Menu screen, see Figure 3-3 , move to any IC6 display by
positioning the cursor to highlight the desired display and press the MENU key. A
second pressing of the MENU key returns to the Main Menu display.
Figure 3-3 Main menu