INFICON IC6 Thin Film Deposition Controller - Manual (Page 58)

3 - 4
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
8 Sensor Connectors - Channels 5 & 6 (optional)
Expansion panel to accommodate the optional addition of two more sensors,
sensors 5 & 6.
9 Sensor Connectors - Channels 7 & 8 (optional)
Expansion panel to accommodate the optional addition of two more sensors,
sensors 7 & 8.
10 TCP/IP Connector (Optional)
Provides connections for TCP/IP interface.
RS-232C Remote Communication Connector (standard)
Provides a 9-pin RS-232C communications port.
11 For future expansion options
12 6-Channel DAC (optional)
Provides recorder output for six channels (15 pin miniature D-sub connector).
Outputs are programmable for recorder function.
13 Fan Outlet
Exhaust opening for the IC6’s miniature fan; Do not block!
14 24-Volt Supply (standard)
Provides three 24 V (dc) supplies rated at 1.75 Amps. See Table 2-5 on page
2-12 .
15 6-Channel DAC (standard)
Provides source control voltage or recorder output for 6 channels (BNC
connectors). Outputs are programmable for Source Control or Recorder
Voltage.