INFICON IC6 Thin Film Deposition Controller - Manual (Page 281)

15 - 11
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
USB (File Check Sum)
Error: Data Corrupt The message is
removed from
the screen on
any key press or
if another
transient
message
appears Storage 25
USB error: Bad Conf.
File Storage 26
USB DataLog Fast Out
Error 27
USB Error (generic) USB Interface system error All 28
(USB: Conf. file:)
Structure Version
Change Structure version updated because of the
new configuration. Storage 29
(USB:) Parameter Value
Changed Parameter value has been adjusted during
the Range Check verification procedure. Storage 30
USB Busy Any key is pressed while the USB is busy. All 31
(USB:) No Such File
(Available) Attempt to access non- existing or folder
non-specific file. Storage 32
(USB: Too many files)
Archive Old Files Too many files in a directory All 33
No Start: Too Many
Layers Start key was pressed when the allowed
number of layers are already running. All 40
All Tags Set Both tags are already set when the tag key
was pressed. Process 41
No Tags Across
Processes An attempt was made to set the two tags in
two different processes. Process 42
Material Running The material was running when the Paste
material or the default material functions
keys were pressed. Material 43
Material Copied After the copy material function is
successful Material 44
Material Pasted After the paste material function is
successful. Material 45
No Material Copied Paste Material function key was pressed
with no material pasted. Material 46
Material Defaulted After Default Material function is
successful. Material 47
Not Enough Layers An attempt was made to insert more layers
then the process can hold. Process 48
Table 15-5 Transient messages (continued)
Transient Message Set Clear Screen Remote
Comm.
Encodes