INFICON Ecotec E3000 Multigas-Sniffer-Leak Detector User Manual
Ecotec e3000, Translation of the original operating instructions, Leak detector
Table of contents
Document Outline
- Ecotec E3000
- Table of Contents
- 1 About this manual
- 2 Safety
- 3 Shipment, transport, storage
- 4 Description
- 5 Installation
- 6 Operation
- 6.1 Start-up
- 6.2 Operating the device
- 6.3 Settings before measurements
- 6.4 Settings for the measurements
- 6.4.1 Selecting the gas, changing gas parameters, activating measurement
- 6.4.2 Calibration
- 6.4.3 Gas equivalent to helium and hydrogen, settings for diluted gas
- 6.4.4 Suppressing interfering gases (Sophisticated interfering gas suppression - IGS)
- 6.4.5 Setting a user-defined gas
- 6.4.6 Measuring
- 6.4.7 Measuring with I•Guide
- 6.5 Idle state (sleep)
- 6.6 Service
- 6.7 Calling up information about the device
- 6.8 Special features of individual gases
- 6.9 Switching off the device
- 7 Warnings and error messages
- 8 Maintenance
- 9 Taking out of service
- 10 Appendix
- Index