INFICON IC6 Thin Film Deposition Controller - Manual (Page 154)

9 - 6
PN
07
4-
50
5-
P1
F
IC6 Operating Manual
Figure 9-5 Function keys IF/THEN, REPLACE, INSERT
With the cursor in the lower half of the Event page, the F4 key will carry the Negate
function in addition to the first three shown above.
When moving the cursor from an event or action, the next element is a numeric
field, if required.
A connector field is required between events. The Toggle key is used to select the
connector in the statement.
9.2.3 AND/OR and ON Logic Connectors
If the cursor is on a connector designated by ccc, pressing TOGL will toggle the ccc
between a logical AND and a logical OR.
For those Events which are layer, material or source specific an additional operator
can be selected. This is the ON operator and pressing the TOGL key will now
toggle between AND, OR, and ON.
9.2.3.1 ON Operator
The ON operator is designed for use in multi-layer applications to link an event to
a particular layer, material or source.
The only Events allowed following the ON connector are Layer ###, Material ###
and Source ###. Only the events that can be associated with one of these entities
can precede the ON operator. This includes all States, Pre-Deposit, Deposit,
Post-Deposit, Non-Deposit, Final Thickness, Thick Limit, Time Limit, Layer,