Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 844)

816 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
VRRP-E Extension for Server Virtualization
FIGURE 42 Short path forwarding
VRRP-E Extension for server virtualization
configuration example
Under the VRRP-E VRID configuration level, there is an option to enable short-path-forwarding.
To enable short-path-forwarding, enter the following commands.
Brocade(config)# router vrrp-extended
Brocade(config)# interface ve 10
Brocade(config-vif-10)# ip address 10.10.10.25/24
Brocade(config-vif-10)# ip vrrp-extended vrid 10
Brocade(config-vif-10-vrid-10)# backup priority 50
Brocade(config-vif-10-vrid-10)# ip-address 10.10.10.254
Brocade(config-vif-10-vrid-10)# short-path-forwarding
Brocade(config-vif-10-vrid-10)# activate
Syntax: [no] short-path-forwarding