Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 627)

Multi-Service IronWare Routing Configuration Guide 599
53-1003033-02
clear ipv6 bgp vrf
clear ipv6 bgp vrf
Clears IPV6 neighbor information for a specific VRF
Syntax clear ipv6 bgp local [routes]
Command
Default
None
Parameters routes Clears local route information
local Clears local information
Command
Modes
Global configuration mode
Usage
Guidelines
The clear ipv6 bgp local command clears the local route information for IPv6 neighbor for a specific
VPN routing/ forwarding instance.
Examples The following clear commands are provided with the VRF option.
Brocade(config)#clear ipv6 bgp red
Related
Commands
address-family ipv6 unicast vrf vrf-name
Release Command History
Multi-Service IronWare R05.5.00 This command was introduced.