Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 558)

530 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Clearing BGP4+ information
Syntax: clear ipv6 bgp traffic
Clearing BGP4+VPNv6 neighbor information
To clear the local information for all BGP4+ VPNv6 neighbors, enter the following command.
Brocade(config)# clear ip bgp vpnv6 neighbor 200 soft in
Syntax: clear ip bgp vpnv6 neighbor { as-number { soft | soft-outbound } | ip-address { soft |
soft-outbound }| all { soft | soft-outbound }}
Clearing BGP4+ VRF6 information
You can perform the following tasks related to BGP4+ VRF6 information:
• Clearing local information
• Clearing BGP neighbor
• Clearing BGP routes
• Clearing BGP traffic counters
Clearing BGP4+ VRF6 local information
To clear the local information for all BGP4+ VRF6 neighbors, enter the following command.
Brocade# clear ipv6 bgp vrf red local routes
Syntax: clear ipv6 bgp vrf vrf-name local routes
Clearing BGP4+ VRF6 neighbor information
To clear the neighbor information for all BGP4+ VRF6 neighbors, enter the following command.
Brocade# clear ipv6 bgp vrf vrf1 neighbor
Syntax: clear ipv6 bgp vrf vrf-name neighbor
Clearing BGP4+ VRF6 routes
To clear the BGP4+ routes, enter the following command.
Brocade# clear ipv6 bgp vrf vrf1 routes
Syntax: clear ipv6 bgp vrf vrf-name routes
Clearing BGP4+ VRF6 traffic counters
To clear the message counters (reset them to 0) for all BGP4+ neighbors, enter the following
command.
Brocade# clear ipv6 bgp vrf vrf1 traffic