Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 258)

230 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying OSPF information
Displaying OSPF external link state information
To display external link state information, enter the following command at any CLI level.
Syntax: show ip ospf database external-link-state [advertise num | extensive | link-state-id ip-addr
| router-id ip-addr | sequence-number num(Hex) ]
The advertise num parameter displays the hexadecimal data in the specified LSA packet. The num
parameter identifies the LSA packet by its position in the router’s External LSA table. To determine
an LSA packet’s position in the table, enter the show ip ospf external-link-state command to display
the table.
The extensive option displays the LSAs in decrypted format.
NOTE
You cannot use the extensive option in combination with other display options. The entire database
is displayed.
The link-state-id ip-addr parameter displays the External LSAs for the LSA source specified by
IP-addr.
The router-id ip-addr parameter shows the External LSAs for the specified OSPF router.
The sequence-number num(Hex) parameter displays the External LSA entries for the specified
hexadecimal LSA sequence number.
This display shows the following information.
TABLE 30 CLI display of OSPF external link state information
This field... Displays...
Index ID of the entry
Aging The age of the LSA, in seconds.
LS ID The ID of the link-state advertisement from which the device learned this
route.
Router The router IP address.
Netmask The subnet mask of the network.
Metric The cost (value) of the route
Flag State information for the route entry. This information is used by
Brocade technical support.
Brocade#show ip ospf database external-link-state
Index Aging LS ID Router Netmask Metric Flag
1 591 10.65.13.0 10.65.12.1 ffffff00 8000000a 0000
2 591 10.65.16.0 10.65.12.1 ffffff00 8000000a 0000
3 591 10.65.14.0 10.65.12.1 ffffff00 8000000a 0000
4 591 10.65.17.0 10.65.12.1 ffffff00 8000000a 0000
5 592 10.65.12.0 10.65.12.1 ffffff00 8000000a 0000
6 592 10.65.15.0 10.65.12.1 ffffff00 8000000a 0000
7 592 10.65.18.0 10.65.12.1 ffffff00 8000000a 0000