Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 648)

620 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
show ipv6 bgp vrf neighbors
Examples The following example displays BGP4+ neighbor information:
Brocade#show ipv6 bgp vrf abc neighbors
Total number of BGP Neighbors: 1
1 IP Address: 3:3:3::3, AS: 100 (IBGP), RouterID: 3.3.3.3, VRF: abc
State: ESTABLISHED, Time: 0h2m48s, KeepAliveTime: 60, HoldTime: 180
KeepAliveTimer Expire in 47 seconds, HoldTimer Expire in 120 seconds
Minimal Route Advertisement Interval: 0 seconds
UpdateSource: Loopback 1
RefreshCapability: Received
Messages: Open Update KeepAlive Notification Refresh-Req
Sent : 2 0 4 0 0
Received: 1 1 3 0 0
Last Update Time: NLRI Withdraw NLRI Withdraw
Tx: --- --- Rx: 0h2m48s ---
Last Connection Reset Reason:Unknown
Notification Sent: Unspecified
Notification Received: Unspecified
Neighbor NLRI Negotiation:
Peer Negotiated IPV6 unicast capability
Peer configured for IPV6 unicast Routes
Neighbor ipv6 MPLS Label Capability Negotiation:
Neighbor AS4 Capability Negotiation:
Outbound Policy Group:
ID: 2, Use Count: 2
BFD:Disabled
TCP Connection state: ESTABLISHED, flags:00000044 (0,0)
Maximum segment size: 1440
TTL check: 0, value: 0, rcvd: 63
Byte Sent: 121, Received: 205
Local host: 1:1:1::1, Local Port: 179
Remote host: 3:3:3::3, Remote Port: 8041
ISentSeq: 28769169 SendNext: 28769291 TotUnAck: 0
TotSent: 122 ReTrans: 0 UnAckSeq: 28769291
IRcvSeq: 29018467 RcvNext: 29018673 SendWnd: 64981
TotalRcv: 206 DupliRcv: 0 RcvWnd: 65000
SendQue: 0 RcvQue: 0 CngstWnd: 3060
FRR Forwarding State: Pri(active), Backup(up)
IRcvSeq The initial receive sequence number for the session.
RcvNext The next sequence number expected from the neighbor.
SendWnd The size of the send window.
TotalRcv The number of sequence numbers received from the neighbor.
DupliRcv The number of duplicate sequence numbers received from the neighbor.
RcvWnd The size of the receive window.
SendQue The number of sequence numbers in the send queue.
RcvQue The number of sequence numbers in the receive queue.
CngstWnd The number of times the window has changed.
Output field Description