Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 508
480
Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying global IPv6 information
Displaying statistics for IPv6 subnet rate limiting
Run the show rate-limit ipv6 subnet and show rate-limit protocol commands to display information
about IPv6 rate limiting.
Syntax: show rate-limit ipv6-subnet
describes the fields from the output of show rate-limit ipv6 subnet command.
nextheader
The number of Next Header errors sent by the device.
option
The number of Option errors sent by the device.
redirect
The number of Redirect errors sent by the device.
unknown
The number of Unknown errors sent by the device.
UDP statistics
received
The number of UDP packets received by the device.
sent
The number of UDP packets sent by the device.
no port
The number of UDP packets dropped because the packet did not contain a valid
UDP port number.
input errors
This information is used by Brocade Technical Support.
TCP statistics
active opens
The number of TCP connections opened by the device by sending a TCP SYN to
another device.
passive opens
The number of TCP connections opened by the device in response to
connection requests (TCP SYNs) received from other devices.
failed attempts
This information is used by Brocade Technical Support.
active resets
The number of TCP connections the device reset by sending a TCP RESET
message to the device at the other end of the connection.
passive resets
The number of TCP connections the device reset because the device at the
other end of the connection sent a TCP RESET message.
input errors
This information is used by Brocade Technical Support.
in segments
The number of TCP segments received by the device.
out segments
The number of TCP segments sent by the device.
retransmission
The number of segments that the device retransmitted because the
retransmission timer for the segment had expired before the device at the other
end of the connection had acknowledged receipt of the segment.
TABLE 90
IPv6 traffic statistics fields (Continued)
This field...
Displays...
Brocade# show rate-limit ipv6 subnet
Fwd: 252 Drop: 155 bytes
Re-mark: 0 Total: 407 bytes