Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 699

Multi-Service IronWare Routing Configuration Guide
671
53-1003033-02
Displaying OSPFv3 information
The inter-prefix keyword displays detailed information about the inter-area prefix LSAs only.
The inter-router keyword displays detailed information about the inter-area router LSAs only.
The intra-prefix keyword displays detailed information about the intra-area prefix LSAs only.
The link keyword displays detailed information about the link LSAs only.
The link-id number parameter displays detailed information about the specified link LSAs only.
The network number displays detailed information about the network LSAs only.
The router number displays detailed information about the router LSAs only.
The scope area-id parameter displays detailed information about the LSAs for a specified area, AS,
or link.
This display shows the following information.
For example, to display detailed information about all LSAs in the database, enter the Show ipv6
ospf database advrtr command will display the type-7 LSAs in detail.
TABLE 132
OSPFv3 database summary fields
This field...
Displays...
Area ID
The OSPF area in which the device resides.
Type
Type of LSA. LSA types can be the following:
•
Rtr – Router LSAs (Type 1).
•
Net – Network LSAs (Type 2).
•
Inap – Inter-area prefix LSAs for ABRs (Type 3).
•
Inar – Inter-area router LSAs for ASBRs (Type 4).
•
Extn – AS external LSAs (Type 5).
•
Link – Link LSAs (Type 8).
•
Iap – Intra-area prefix LSAs (Type 9).
LS ID
The ID of LSA in Decimal.
Adv Rtr
The device that advertised the route.
Seq(Hex)
The sequence number of the LSA. The OSPF neighbor that sent the LSA stamps
it with a sequence number to enable the device and other OSPF routers to
determine which LSA for a given route is the most recent.
Age
The age of the LSA, in seconds.
Chksum
A checksum for the LSA packet. The checksum is based on all the fields in the
packet except the age field. The device uses the checksum to verify that the
packet is not corrupted.
Len
The length, in bytes, of the LSA.
Sync
Sync status with the slave management processor (MP).