Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 264)

236 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying OSPF information
Displaying OSPF virtual neighbor
Use the show ip ospf virtual neighbor command to display OSPF virtual neighbor information. The
following example relates to the configuration in
Figure 16 .
Syntax: show ip ospf virtual neighbor [num]
The num parameter displays the table beginning at the specified entry number.
Displaying OSPF virtual link information
Use the show ip ospf virtual link command to display OSPF virtual link information. The output
below represents the virtual links configured in
Figure 16 .
Syntax: show ip ospf virtual link [num]
The num parameter displays the table beginning at the specified entry number.
Clearing OSPF neighbors
You can clear all OSPF neighbors or a specified OSPF neighbor using the following command.
Brocade# clear ip ospf neighbor all
Syntax: clear ip ospf neighbor all | ip-address
Selecting the all option clears all of the OSPF neighbors on the router.
The ip-address variable allows you to clear a specific OSPF neighbor.
Displaying an OSPF Graceful Restart information
To display OSPF Graceful Restart information for OSPF neighbors use the show ip ospf neighbors
command as shown in the following.
Brocade#show ip ospf neighbors
Port Address Pri State Neigh Address Neigh ID Ev Opt Cnt
2/7 10.50.50.10 0 FULL/OTHER 10.50.50.1 10.10.10.30 21 66 0
< in graceful restart state, helping 1, timer 60 sec >
Use the following command to display Type 9 Graceful LSAs on a router.
Brocade#show ip ospf database grace-link-state
Brocade# show ip ospf virtual neighbor
Indx Transit Area Router ID Neighbor address options
1 1 10.1.1.10 10.14.1.10 2
Port Address state events count
6/2 10.11.1.27 FULL 5 0
Brocade# show ip ospf virtual link
Indx Transit Area Router ID Transit(sec) Retrans(sec) Hello(sec)
1 1 10.1.1.10 1 5 10
Dead(sec) events state Authentication-Key
40 1 ptr2ptr None
MD5 Authentication-Key: None
MD5 Authentication-Key-Id: None
MD5 Authentication-Key-Activation-Wait-Time: 300