Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 430)

402 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying the management VRF information
The show who command displays information about the management VRF from which the Telnet
and SSH connection has been established.
Brocade(config)# show who
Console connections:
established, monitor enabled, privilege super-user, in config mode
1 minutes 47 seconds in idle
Telnet server status: Enabled
Telnet connections (inbound):
1 established, client ip address 10.53.1.181, user is lab, privilege
super-user
using vrf default-vrf.
2 minutes 46 seconds in idle
2 established, client ip address 10.20.20.2, user is lab, privilege
super-user
using vrf mvrf.
16 seconds in idle
3 closed
4 closed
5 closed
Telnet connections (outbound):
6 established, server ip address 10.20.20.2, from Telnet session 2, ,
privilege super-user
using vrf mvrf.
12 seconds in idle
7 closed
8 closed
9 closed
10 closed
SSH server status: Enabled
SSH connections:
1 established, client ip address 10.53.1.181, privilege super-user
using vrf default-vrf.
you are connecting to this session
3 seconds in idle
2 established, client ip address 10.20.20.2, privilege super-user
using vrf mvrf.
48 seconds in idle
3 closed
4 closed
5 closed
6 closed
7 closed
8 closed
9 closed
10 closed
11 closed
12 closed
13 closed
14 closed
15 closed
import route-map The name of the import route-map, if any, that is configured for this
management VRF.
export route-map The name of the export route-map if a route-map has been configured
for this management VRF.
TABLE 68 Output from the show vrf command (Continued)
This field... Displays...