Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 597)

Multi-Service IronWare Routing Configuration Guide 569
53-1003033-02
Displaying BGP4+ information
Displaying BGP4+ peer group configuration information
You can display configuration information for all peer groups or a specified peer group configured
on a device.
For example, to display configuration information for a peer group named peer1, enter the following
command at any level of the CLI.
Syntax: show ipv6 bgp peer-group [peer-group-name]
The display shows only parameters that have values different from their default settings.
NLRIs Sent in Update Message The number of NLRIs for new routes the device has sent to this neighbor in
UPDATE messages:
•
Withdraws – The number of routes the device has sent to the neighbor to
withdraw.
•
Replacements – The number of routes the device has sent to the
neighbor to replace routes the neighbor already has.
Peer Out of Memory Count for Statistics for the times the device has run out of BGP4+ memory for the
neighbor during the current BGP4+ session:
•
Receiving Update Messages – The number of times UPDATE messages
were discarded because there was no memory for attribute entries.
•
Accepting Routes(NLRI) – The number of NLRIs discarded because there
was no memory for NLRI entries. This count is not included in the
Receiving Update Messages count.
•
Attributes – The number of times there was no memory for BGP4+
attribute entries.
•
Outbound Routes (RIB-out) – The number of times there was no memory
to place a “best” route into the neighbor's route information base
(Adj-RIB-Out) for routes to be advertised.
•
Outbound Routes Holder – For debugging purposes only.
TABLE 120 BGP4+ neighbor route summary information (Continued)
This field... Displays...
Brocade# show ipv6 bgp peer-group peer1
1 BGP peer-group is pg1, Remote AS: 65002
Description: device group 1
NextHopSelf: yes
Address family : IPV4 Unicast
Address family : IPV4 Multicast
Address family : IPV6 Unicast
Members:
IP Address: 10.169.102.2
IP Address: 10.169.100.2
IP Address: 10.169.101.2
IP Address: 10.169.103.2
IP Address: 10.169.104.2
IP Address: 10.169.105.2
IP Address: 10.169.106.2
IP Address: 10.169.107.2
IP Address: 10.169.108.2
IP Address: 10.169.109.2
IP Address: 10.169.110.2
IP Address: 10.169.111.2
IP Address: 10.169.112.2