Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 593

Multi-Service IronWare Routing Configuration Guide
565
53-1003033-02
Displaying BGP4+ information
Syntax: show ipv6 bgp neighbor ipv6-address routes best | detail [best | unreachable] |
unreachable
The ipv6-address parameter displays the routes for a specified neighbor. You must specify this
address in hexadecimal using 16-bit values between colons as documented in RFC 2373.
The best keyword displays the “best” routes, which are installed in the IPv6 route table.
The unreachable keyword displays the routes whose destinations are unreachable using any of the
BGP4+ paths in the IPv6 route table.
The detail keyword displays detailed information about the routes. If you do not specify this
parameter, a summary of the routes displays.
This display shows the following information.
TABLE 118
Summary of best and unreachable routes from a BGP4+ neighbor
This field...
Displays...
Number of accepted routes from
a specified neighbor
The number of routes displayed by the command.
Status codes
A list of the characters the display uses to indicate the route’s status. The
status code appears in the Status column of the display. The status codes are
described in the command’s output.
Prefix
The route’s prefix.
Next Hop
The next-hop router for reaching the route from the device.
MED
The value of the route’s MED attribute. If the route does not have a metric, this
field is blank.
LocPrf
The degree of preference for the route relative to other routes in the local AS.
When the BGP4+ algorithm compares routes on the basis of local preferences,
the route with the higher local preference is chosen. The preference can have a
value from 0 – 4294967295.
Weight
The value that this device associates with routes from a specific neighbor. For
example, if the receives routes to the same destination from two BGP4+
neighbors, the prefers the route from the neighbor with the larger weight.
Brocade# show ipv6 bgp neighbor 2001:db8::106 routes best
There are 2 accepted routes from neighbor 2001:db8::106
Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix Next Hop MED LocPrf Weight Status
1 2001:db8:2002::/48 2001:db8::106 1 100 0 BE
AS_PATH: 65001
2 2001:db8:2002:1234::/64 2001:db8::106 1 100 0 BE
AS_PATH: 65001