beautypg.com

Displaying ospf interface brief information, Displaying ospf, Interface brief information – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual

Page 252

background image

224

Multi-Service IronWare Routing Configuration Guide

53-1003033-02

Displaying OSPF information

Displaying OSPF interface brief information

The following command introduced in version 03.3.00 is used to display the OSPF database brief
information.

Brocade# show ip ospf interface brief

Number of Interfaces is 1

Interface Area IP Addr/Mask Cost State Nbrs(F/C)

eth 1/2 0 10.1.1.2/24 1 down 0/0

Table 27

defines the fields shown in the above example output of the show ip ospf interface brief

command.

DR

The router ID (IPv4 address) of the DR.

BDR

The router ID (IPv4 address) of the BDR.

Neighbor Count

The number of neighbors to which the interface is connected.

Adjacent Neighbor
Count

The number of adjacent neighbor routers.

Neighbor:

The IP address of the neighbor.

TABLE 27

Output of the show ip ospf interface brief command

This field

Displays

Interface

The interface through which the router is connected to the neighbor.

Area

The OSPF Area that the interface is configured in.

IP Addr/Mask

The IP address and mask of the interface.

Cost

The configured output cost for the interface.

TABLE 26

Output of the show ip ospf interface command (Continued)

This field

Displays