Displaying ipv6 neighbor route summary information – Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual
Page 595
Multi-Service IronWare Routing Configuration Guide
567
53-1003033-02
Displaying BGP4+ information
Displaying IPv6 neighbor route summary information
You can display route summary information for all neighbors or a specified neighbor only.
For example, to display summary information for neighbor 2001:db8::110, enter the following
command at any level of the CLI.
Age
The age of the route, in seconds.
Next Hop
For information about this field, refer to
Learned from Peer
The IPv6 address of the neighbor from which this route is learned.
“Local Router” indicates that the device itself learned the route.
LOCAL_PREF
For information about this field, refer to
MED
The value of the RIB route’s MED attribute. If the route does not
have a metric, this field is blank.
Origin
The source of the route information. The origin can be one of the
following:
•
EGP – The routes with this set of attributes came to BGP4+
through EGP.
•
IGP – The routes with this set of attributes came to BGP4+
through IGP.
•
INCOMPLETE – The routes came from an origin other than one
of the above. For example, they may have been redistributed
from OSPFv3 or RIPng.
When BGP4+ compares multiple routes to a destination to select
the best route, IGP is preferred over EGP and both are preferred
over INCOMPLETE.
Weight
For information about this field, refer to
AS-PATH
For information about this field, refer to
TABLE 119
Detailed best and unreachable routes from a BGP4+ neighbor (Continued)
This field...
Displays...
Brocade# show ipv6 bgp neighbor 2001:db8::110 routes-summary
1 IP Address: 2001:db8::110
Routes Accepted/Installed:0, Filtered/Kept:0, Filtered:0
Routes Selected as BEST Routes:0
BEST Routes not Installed in IP Forwarding Table:0
Unreachable Routes (no IGP Route for NEXTHOP):0
History Routes:0
NLRIs Received in Update Message:0, Withdraws:0 (0), Replacements:0
NLRIs Discarded due to
Maximum Prefix Limit:0, AS Loop:0
Invalid Nexthop:0, Invalid Nexthop Address:0.0.0.0
Duplicated Originator_ID:0, Cluster_ID:0
Routes Advertised:2, To be Sent:0, To be Withdrawn:0
NLRIs Sent in Update Message:2, Withdraws:0, Replacements:0
Peer Out of Memory Count for:
Receiving Update Messages:0, Accepting Routes(NLRI):0
Attributes:0, Outbound Routes(RIB-out):0 Outbound Routes Holder:0