Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 836)

808 Multi-Service IronWare Routing Configuration Guide
53-1003033-02
Displaying configuration information for VRRP and VRRP-E
. received packets dropped by owner = 0
. received packets with ttl errors = 0
. received packets with ipv6 address mismatch = 0
. received packets with advertisement interval mismatch = 0
. received packets with invalid length = 0
- total number of vrrp packets sent = 1175
. sent backup advertisements = 0
. sent packets with zero priority = 0
- received neighbor solicitation packets dropped = 0
- received proxy neighbor solicitation packets dropped = 0
- received ipv6 packets dropped = 0
Syntax: show ipv6 vrrp statistics
Syntax: show ipv6 vrrp-extended statistics
Displaying configuration information for
VRRP and VRRP-E
To display the current configuration information for IPv4 VRRP or VRRP-E and IPv6 VRRP or VRRP-E,
enter the following command at any level of the CLI.
Brocade(config-if-e10000-1/3)# show run
…
router vrrp
…
interface ethernet 1/1
port-name Port111
enable
ip address 10.30.30.2/28
ip vrrp vrid 10
owner
ip-address 10.30.30.2
activate
!
…
interface ethernet 1/3
enable
ip address 10.13.13.2/24
ip vrrp vrid 13
version v3
backup
ip-address 10.13.13.3
activate
…
Syntax: show run