Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 753)

Multi-Service IronWare Routing Configuration Guide 725
53-1003033-02
Displaying IPv6 IS-IS information
Displaying IPv6 IS-IS information
You can display the following information about IPv6 IS-IS:
• General IPv6 IS-IS information.
• IPv6 IS-IS configuration information.
• IPv6 IS-IS error statistics.
• LSP database entries.
• IS-IS system ID to hostname mappings.
• IPv6 IS-IS interface information.
• IPv6 IS-IS memory usage information.
• IPv6 IS-IS neighbor information.
• IPv6 IS-IS path information.
• IPv6 IS-IS redistribution information.
• IPv6 IS-IS route information.
• IPv6 IS-IS traffic statistics.
Displaying IPv6 IS-IS information
To display general IPv6 IS-IS information, enter the following command at any CLI level.
Syntax: show ipv6 isis
This display shows the following information.
Brocade# show ipv6 isis
IS-IS Routing Protocol Operation State: Enabled
IS-Type: Level-1-2
System ID: 0000.0055.0008
Manual area address(es):
49.8585
Interfaces with Integrated IS-IS for IPv6 configured:
Interface 4/1 Interface 4/2 Interface 4/11 Interface 4/12
Interface 4/13 Interface 4/14 Interface 4/15 Interface 4/16
Interface 4/17 Interface 4/35 Interface 4/36 Interface 4/37
Interface 4/38 Interface v43 Interface v44 Interface lb1
Following Routes are Redistributed into IS-IS for IPv6:
CONNECTED
Number of Routes redistributed into IS-IS: 1
Domain password: None
Area password: None
IS-IS for IPV6 Route Administrative Distance: 115
Hold Time Between Two SPF Calculations: 5
Global Hello Padding: Enabled