Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) - Manual (Page 575)

Multi-Service IronWare Routing Configuration Guide 547
53-1003033-02
Displaying BGP4+ information
You also can display all the dampened routes by using the show ipv6 bgp dampened-paths
command. For more information, refer to
“Displaying dampened BGP4+ paths” on page 541.
Displaying BGP4+ neighbor information
You can display the following information about a device’s BGP4+ neighbors:
Configuration information and statistics:
• Router advertisements.
• Route-attribute entries.
• Route flap dampening statistics.
• The last packet containing an error.
• Received Outbound Route Filters (ORFs).
• Routes received from a neighbor.
• BGP4+ Routing Information Base (RIB).
• Received best, not installed best, and unreachable routes.
• Route summary.
Reuse The amount of time (in hh:mm:ss) after which the path is again available.
Path The AS path of the route.
TABLE 107 Route flap dampening statistics
This field... Displays...