beautypg.com

Brocade Multi-Service IronWare Routing Configuration Guide (Supporting R05.6.00) User Manual

Page 712

background image

684

Multi-Service IronWare Routing Configuration Guide

53-1003033-02

Displaying OSPFv3 information

For example, to display detailed information about a neighbor with the router ID of 10.1.1.1, enter
the following command at any CLI level.

This display shows the following information.

TABLE 139

Detailed OSPFv3 neighbor information

Field

Description

Router ID

For information about this field, refer to

Table 138

on page 683.

Pri

For information about this field, refer to

Table 138

on page 683.

State

For information about this field, refer to

Table 138

on page 683.

DR

For information about this field, refer to

Table 138

on page 683.

BDR

For information about this field, refer to

Table 138

on page 683.

Interface [State]

For information about this field, refer to

Table 138

on page 683.

DbDesc bit...

The Database Description packet, which includes 3 bits of information:

The first bit can be “i” or “-”. “i” indicates the inet bit is set. “-” indicates the
inet bit is not set.

The second bit can be “m” or “-”. “m” indicates the more bit is set. “-”
indicates the more bit is not set.

The third bit can be “m” or “s”. An “m” indicates the master. An “s” indicates
standby.

Index

The ID of the LSA from which the neighbor learned of the router.

DR Decision

The router ID (IPv4 address) of the neighbor’s elected DR and BDR.

Last Received Db Desc

The content of the last database description received from the specified neighbor.

Number of LSAs in Db Desc
retransmitting

The number of LSAs that need to be retransmitted to the specified neighbor.

Number of LSAs in Summary
List

The number of LSAs in the neighbor’s summary list.

Number of LSAs in Request
List

The number of LSAs in the neighbor’s request list.

Number of LSAs in
Retransmit List

The number of LSAs in the neighbor’s retransmit list.

Seqnum Mismatch

The number of times sequence number mismatches occurred.

Brocade# show ipv6 ospf neighbor router-id 10.3.3.3

RouterID Pri State DR BDR Interface[State]

10.3.3.3 1 Full 10.3.3.3 10.1.1.1 ve 10 [BDR]

DbDesc bit for this neighbor: --s

Nbr Ifindex of this router: 1

Nbr DRDecision: DR 10.3.3.3, BDR 10.1.1.1

Last received DbDesc: opt:xxx ifmtu:0 bit:--s seqnum:0

Number of LSAs in DbDesc retransmitting: 0

Number of LSAs in SummaryList: 0

Number of LSAs in RequestList: 0

Number of LSAs in RetransList: 0

SeqnumMismatch 0 times, BadLSReq 0 times

OnewayReceived 0 times, InactivityTimer 0 times

DbDescRetrans 0 times, LSReqRetrans 0 times

LSUpdateRetrans 1 times

LSAReceived 12 times, LSUpdateReceived 6 times